Packaging, Transport And Storage - Vega VEGAMIP R61 Operating Instructions Manual

3 Product description
Functional principle
Packaging
Transport
Transport inspection
10
Several antenna versions are available for different applications.
1
Fig. 2: Antenna versions
Threaded version - internal horn antenna with PTFE cover
1
2 Plastic encapsulated antenna with PP cover
Horn antenna/316L
3
4 VEGAMIP 61 with angled antenna extension
Encapsulated horn antenna with PTFE cover
5
The emitting unit transmits a focused microwave signal via horn
antenna to the receiving unit on the opposite side. If there is medium
between emitting and receiving unit, the signal is damped. This
change is detected by the built-in electronics module and converted
into a switching command.

3.3 Packaging, transport and storage

Your instrument was protected by packaging during transport. Its
capacity to handle normal loads during transport is assured by a test
according to DIN EN 24180.
The packaging of standard instruments consists of environment-
friendly, recyclable cardboard. For special versions, PE foam or PE foil
is also used. Dispose of the packaging material via specialised
recycling companies.
Transport must be carried out under consideration of the notes on the
transport packaging. Nonobservance of these instructions can cause
damage to the device.
The delivery must be checked for completeness and possible transit
damage immediately at receipt. Ascertained transit damage or
concealed defects must be appropriately dealt with.
2
3
VEGAMIP R61 • - Transistor
5
4