Mounting And Installation; Wired Components - Siemens QAA75 series Technical Manual

2 Mounting and installation

2.1 Wired components

Devices in general
Room units
Powered by base
Siemens
Building Technologies
Do not expose devices to dripping water.
Install room units in the main occupancy rooms.
The place of installation should be chosen so that the sensor can capture the room
temperature as accurately as possible without getting adversely affected by direct
solar radiation or other heat or refrigeration sources (about 1.5 meters above the
floor)
The base provides the power for QAA55 and QAA75. When the units are removed
from the base, power is cut off (i.e. the units are out of operation).
Operator / Room / Auxiliary devices
Mounting and installation
Wired components
CE1U2358en_04
2014-09-26
2
9