3.3.3
Operation
Display example
1
2
3
Siemens
Building Technologies
User levels
The user levels only allow authorized target groups to make settings. To reach the
required user level, proceed as follows:
Operator / Room / Auxiliary devices
Description
You see the basic display.
Press the OK button for 3 seconds.
Now, you are on the user level "End user".
Press the INFO button for 3 seconds.
You are on user level "Enduser".
If the change to the "Heating engineer" level was successful,
the display shows "ON" as a confirmation.
Handling
3
AVS37.390...
75
CE1U2358en_04
2014-09-26