Beeps - Keys, Battery, Range; Select Services - Siemens Gigaset 2000C Operating Instructions Manual

Settings

Beeps – keys, battery, range...

Press the menu key.
  
Scroll to



and confirm.

0   
Scroll to
1 

and confirm.



 
Confirm .

For an explanation of the individual
 
  
beeps, see "Overview – Beeps", page
  
51.
  
 

  


Example: Activating/deactivating the range warning
  8 
Scroll to
 6
and confirm.

  8 
Type of beep

Range warning symbol

Confirm current setting.
OK
 ''
or
depending on the current setting

Press the relevant display key.
or
''

Confirm the setting (save).
52
Settings

Select services

The stored default select services – operating sequences
for Telecom services – cannot be used with cordless EM.
Saving functions under
Frequently used functions (operating sequences) that are
started when the mobile is in the "on" status can be stored



"under" the
Example: Call forwarding to a specific user, in accordance
with "Overview - code functions" on page 28.





The remaining operating steps are performed in a similar
way to those described under "Saving a short cut – new
entry", see page 42.
Starting saved functions









Deleting default select services
The default select services are already loaded when the unit
is displayed is delivered*.
In order to make more space (approx. 10%) for the tele-
phone directory / shor t cuts, you can delete the default
select services.






%  - #

* not loa ded with international mobile unit variants!



display key. This will simplify operations.
Press the display key.
Press the display key.
Press the display key.
Scroll to the desired function.
Press the display key.
 
Confirm .
Press the display key.
Press the display key.
$%  !
Scroll to
and confirm.
53
Settings
PIN Enter the mobile unit PIN and

confirm.
%  
  +
,

Press the display key –
-%%    % 


displayed for approx. 2 seconds.
or Return to the higher-level display.
Note:



You can also save the default select services again as
1 % "
required using , and



Deactivating the display
If you have not saved any other operating sequences under



, it is advisable to deactivate the select services –




the display key is then no longer displayed:

Press the menu key.
  
Scroll to


 and confirm.

0   
Scroll to
1 

 and confirm.

% " 
Scroll to


$ 
and confirm.

''
Press the display key.

Confirm the setting.
Note:
You can use this function to switch on Select Services
again at any time.
54
is
.