Table of Contents
Advertisement
HDT8012
5.2 Installation via the VESA-75 interface
Located on the rear side of the device is a VESA interface.
Horizontal and vertical distance between the screw holes: 75 mm.
o
Maximum screw-in depth of the blind rivet nuts: 10 mm.
o
ATTENTION
Damage due to excessive tightening torque
The device can be damaged if the permitted tightening torque is not
observed when the VESA bracket is screwed on.
Tighten the screws to max. 5 Nm.
If necessary: also use a suitable threadlocker, e.g., low-strength
liquid adhesive.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
21
Advertisement
Table of Contents
