Table of Contents
Advertisement
HDT8012
2.8 Environmental conditions
The device can be put into operation and used under the following conditions. Failure to observe any
one of these conditions will invalidate the warranty of the device. ADS-TEC cannot be held liable for any
damages arising from improper use and handling.
•
Temperature
in operation*
for storage
•
Humidity
in operation
for storage
•
Air quality: Pollution level 3 or lower according to EN 61131-2.
Vibration and shock resistance
In accordance with EN 60721-3-5 (Environmental conditions for devices for
terrestrial vehicles), the device satisfies the following classes:
•
For mass storage type SSD (solid state drive): class 5M3
•
For mass storage type HDD (hard disk drive): class 5M2
Testing was performed in accordance with the following test standards:
•
EN 60068-2-6 – Vibration (sinusoidal)
(2 - 500 Hz, 40 m/s² peak value, 2 h each axis)
•
EN 60068-2-27 – Shock resistance
(300 m/s², 11 ms, 3 shocks per axis)
•
EN 60068-2-64 – Broadband noise
(3.6 g effective, 30 g peak value, 5 h long)
Testing was also performed in accordance with the following standard:
•
MIL-STD 810F (January 1, 2000), annex C, figure 514.5C (US highway truck
transportation)
*) depending on mass storage device
**) The UL marking applies for operating temperatures up to max. 40°C.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
-20 ... 55°C**
-40 ... 80°C
10 ... 85% without condensate
10 ... 85% without condensate
7
Advertisement
Table of Contents
