Table of Contents
Advertisement
HDT8012
2.9 Conformity
The manufacturer hereby declares that the product described in this instruction
manual complies with all relevant stipulations of the following European directives:
•
2011/65/EC, RoHs Directive
•
2014/30/EU, EMC Directive
•
2014/35/EU, Low Voltage Directive
A corresponding EU conformity declaration is available for competent authorities at the
manufacturer and can be viewed upon request.
The EU conformity declaration can be requested at
http://www.ads-tec.de/support/support-anfrage.html and is available for download at
http://www.ads-tec.de/support/download/eg-konformitaetserklaerung.html.
Recommendation for use:
For full compliance with the EMC legislation, all components and cables
used for device connection must also be compliant with these requirements.
It is therefore necessary to employ BUS and LAN cables with shielded
connectors and these must be installed as per the instructions contained in
the instruction manual.
© ads-tec GmbH • Heinrich-Hertz-Str. 1 • 72622 Nürtingen
8
Advertisement
Table of Contents
