HP 2520-8 Configuration Manual page 68

IPv6 Management Features
IP Preserve for IPv6
HP Switch(config)# show run
Running configuration:
; J9138A Configuration Editor; Created on release #S.15.XX
; Ver #01:05:04
hostname "HP Switch"
ip default-gateway 2001:db8:0:7::5
snmp-server community "public" Unrestricted
vlan 1
name "DEFAULT_VLAN"
untagged 1-10,13-24,1-24
ip address 2001:db8::214:c2ff:fe4c:e480
exit
spanning-tree Trk1 priority 4
password manager
Figure 2-11. Configuration File with Dedicated IP Addressing After Startup with IP Preserve
2-26
For more information on how to use the IP Preserve feature, refer to the
"Configuring IP Addressing" chapter in the current Management and Config-
uration Guide for your switch.
Because the switch's IPv6 address and
default gateway were statically configured
(not assigned by a DHCP server), when the
switch boots up with the IP Preserve startup
configuration file (see Figure 2-10), its current
IPv6 address, subnet mask, and default
gateway are not changed.
If a switch's current IP address was acquired
from a DHCP/Bootp server, the IP Preserve
statement is ignored and the IP addresses in
the downloaded configuration file are
implemented.