flash < primary | secondary >: Copies a software file stored
■
on a remote host to primary or secondary flash memory
on the switch. To run a newly downloaded software
image, enter the reload or boot system flash command.
pub-key-file: Copies a public-key file to the switch.
■
startup-config: Copies a configuration file on a remote
■
host to the startup configuration file on the switch.
oobm: For switches that have a separate out-of-band manage-
ment port, specifies that the transfer will be through the out-
of-band management interface. (Default is transfer through
the data interface.)
IPv6 Management Features
TFTP File Transfers Over IPv6
2-17