Axis C3003-E User Manual page 32

AXIS C3003-E Network Speaker
Troubleshooting
The proouct is accessible locally but not externally
Router configuration
Firewall lrotection
Default routers required
To configure your router to allow incoming data traffic to the Axis lroduct, enable the NAT-traversal
feature which will attemlt to automatically configure the router to allow access to the Axis
lroduct, see NAT traversal (port mappins) for IPv4 on pase 27. The router must sullort UPnP
Check the Internet firewall with your network administrator.
32
TM
.