Page 1
Created: May 12, 2015 Last updated: May 12, 2015 Please note that AXIS does not take any responsibility for how this configuration may affect your system. If the modification fails or if you get other unexpected results, you may have to restore the factory default settings as described in the...
Page 2
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS C3003-E Rev: 1.1 Introduction The following document highlights how to add a door station to Axis Camera Station and then complete further configurations that can be made to meet an operator’s need:...
Page 3
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS C3003-E Step 2 – Associate a horn speaker with a camera To associate a horn speaker with a camera: 1) Select the “Video & Audio” configuration setting and Select the camera the horn speaker is to be associated with.
Page 4
HOW TO – Axis CommunicationsIntegration Guide AXIS Camera Station and AXIS C3003-E Notes: The following describes some of the current limitations: Audio sent from ACS to a horn speaker cannot be recorded. C3003-E microphone not available as audio source in ACS.