Advertisement
If every thing is ok, click the "Finish" button to create an EDS file and save the related
information into the EEPROM of the I-7231D. Then, user can use this EDS on any
CAN master interface.
Step 12: Power off the I-7231D, and remove the wire between the Init* pin and GND
pin on the I-7231D. Then, power on the I-7231D. When the I-7231D has finished the
initialization, the RUN LED on the I-7231D will be flashed about twice per second, and
the I-7231D is into the NMT pre-operational state. For more information about the
CANopen system and CANopen communication set, please refer to the I-7231D user
manual.
I-7231D CPS/DCON Quick Start User Guide (Version 1.1,Oct/2004, I-7231D) ------ 8
Advertisement
