Overcoming Paper Jams - Mitsubishi Electric CP-D707DW Operation Manual

ERROR MESSAGES AND COUNTERMEASURES
Press the OPEN button to open the printing unit.
Make sure that the power is turned on before opening the printing unit.
Remove the ink cassette.
Open the door.
Pull out the defective part of the print paper to the direction of
an arrow.
Cut off the defective part of the print paper with scissors.
• Make sure to cut off the printed part of the print paper. Failure to do this may
result in the ink ribbon sticking to the print paper and being torn.
• Make sure to clean the thermal head and the platen roller.
(on pages 21 and 22).
Remove the print paper.
Install the print paper and the ink cassette with the ink ribbon.
(Refer to pages 11-15.)
Close the door.
Close the printing unit by pushing it.

OVERCOMING PAPER JAMS

NOTE
Refer to "CLEANING"
18