Connection With Usb Data Signal Equipment; Before Operation; Printer Driver Installation - Mitsubishi Electric CP-D70DW Operation Manual

BEFORE OPERATION

CONNECTION WITH USB DATA SIGNAL EQUIPMENT

CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Check that the printer is turned on before connecting procedure.
Turn on the power of a personal computer.
Connect the printer and a personal computer with a USB cable. (when the operation system
to be applied is other than Windows
Connect the printer to a personal computer as shown below.
For Windows 7 users, do not connect the printer to the computer.
®
Refer to the PRINTER DRIVER GUIDE in the CD-ROM for details.
Personal computer
A USB cable is not supplied with this unit. Use the USB 2.0 certified cable of 2 m or less in length.
The printer driver is required to print the data from the personal computer connected with this unit.
The printer driver for Windows
Product name
CPD70X
CPD70V
Refer to the PRINTER DRIVER GUIDE in the CD-ROM for installing the printer driver.
Microsoft, Windows, Windows XP, Windows Vista and Windows 7 are the trademarks or the registered trademarks of
Microsoft Corporation in the U.S.A. and other countries.
Refer to the following website to check the latest version of the printer driver and the printer information.
http://www.MitsubishiElectric.co.jp/vcp/
7)
®
NOTE
To USB port
To USB port
NOTE

PRINTER DRIVER INSTALLATION

is supplied with this unit.
®
Required operating system
Applies for Microsoft Windows
Applies for Windows Vista
NOTE
Digital color printer
XP operation system
®
and Windows 7 operation system
® ®
16