Connection With Usb Data Signal Equipment; Printer Driver Installation - Mitsubishi Electric CP-D80DW Operation Manual

BEFORE OPERATION

CONNECTION WITH USB DATA SIGNAL EQUIPMENT

CONNECTING TO PERSONAL COMPUTER (EXAMPLE)
Check that the printer is turned on before connecting procedure.
Turn on the power of a personal computer.
When the operating system to be applied is Windows
computer with a USB cable.
Connect the printer to a personal computer as shown below.
Personal computer
When the operating system to be applied is Windows
printer to the computer yet.
A USB cable is not supplied with this unit. Use the USB 2.0 certified cable of 2 m or less in length.
The printer driver is required to print the data from the personal computer connected with this unit.
The printer driver and PRINTER DRIVER GUIDE are available on the following website.
http://www.mitsubishielectric.co.jp/vcp/support/driver_en.html
Refer to the PRINTER DRIVER GUIDE for installing the printer driver.
Microsoft, Windows, Windows XP, Windows 7 and Windows 8 are the trademarks or the registered trademarks of Microsoft
Corporation in the U.S.A. and other countries.
Refer to the following website to check the latest version of the printer driver and the printer information.
http://www.mitsubishielectric.co.jp/vcp/support/driver_en.html
To USB port
To USB port
NOTE

PRINTER DRIVER INSTALLATION

NOTE
XP, connect the printer and a personal
®
Digital color printer
7 or Windows 8, do not connect the
® ®
16