Audigy 2 Drive; Audio/Video Inputs And Outputs On Front Panel; Interfaces - Creative Sound Blaster Audigy 2 Platinum User Manual

Audigy 2 Drive

Audio/Video Inputs and
Outputs On Front
Panel

Interfaces

❑ Two RCA jacks for coaxial SPDIF input and output
❑ One headphone output with auto detection via ¼" stereo jack with volume control
❑ One shared line-level analog Line/Microphone input (Line In 2/Mic In 2) via ¼"
stereo jack. Shared input selectable via switch with gain control for microphone
❑ Two mini DIN female connectors for MIDI input and output
❑ Two RCA jacks for left and right channel stereo Auxiliary inputs
❑ Two optical connectors for optical SPDIF input and output
❑ One SB1394/FireWire connector for IEEE 1394 input and output
❑ One 4-pin power supply header for connection to system power supply unit
❑ One 2 x 20 pin AD_EXT header for connection to Sound Blaster Audigy 2 card
❑ One Infrared receiver for receiving infrared signals from the remote control
❑ One 2 x 5-pin SB1394/FireWire header for connection to the Sound Blaster
Audigy 2 card
General Specifications A-5