Securing A Group Ii-Iii (15-36 Kg) Child - KIDDY Guardianfix 3 Instruction Manual

child restraint system and engage directly into the vehicle seat belt latch (Fig. 21).
While doing so, ensure that the seat belt tongue engages with an audible 'click' .
Then thread the lap belt into the impact shield guides (M).
Then tighten the lap belt (Fig. 22). In the process, the impact shield must rest
against your child's torso.
Then thread the shoulder belt into the impact shield guides (M) (Fig. 23).
Ensure that the belt lies flatly and is not twisted.
Tighten the shoulder strap (Fig. 24).
Before driving, ensure that the lap and shoulder belts are correctly positioned
on the impact shield (L), are seated tightly, and are not twisted. The belts must
lie flat over the belt guide area of the impact shield (Fig. 23+24). Check the belt
run regularly.
7.2 Securing a Group II–III (15-36 kg) child
Use without impact shield (L) is only permitted for children
!
weighing at least 15 kg (and/or approximately 4 years of age).
However, we recommend using the impact shield (L) for children
weighing up to 18 kg.
Always remove the seat cushion (J) for use without impact
!
shield (L).
Position your KIDDY on the vehicle seat as described in point 5.1+5.2 or 5.1+5.3.
If you would like to use it in semi-universal mode (fastened with k-fix
the instructions under point 6.
29
EN
+
), following