Synchronise Data; Device Manager; Server Profile Settings - Nokia N91 User Manual

•
Allow sync requests—Select
allow the server to start a synchronization.
• Accept all sync reqs.—Select
device to ask you before a synchronization
initialised by the server is started.
•
Network authentic. (shown only if
set to Internet)—Select Yes
name and password. Scroll down to view the user
name and password fields.
3 Select Back to save the settings and return to the main
view.

Synchronise data

In the Sync main view, you can see the different
synchronization profiles and the kind of data to be
synchronized.
1 Select a synchronization profile and
Synchronise. The status of the synchronization is
shown at the bottom of the screen.
To cancel synchronization before it finishes, select
Cancel.
2
You are notified when the synchronization is
complete. After synchronization is complete, select
Options > View log to open a log file showing the
synchronization status (Complete
how many calendar or contact entries, or notes have
97
Yes if you want to been added, updated, deleted, or discarded (not
synchronized) in your device or on the server.
No if you want your

Device manager

Data bearer is
to enter a network user
Press , and select
receive server profiles and different configuration settings
from your network operator, service provider, or company
information management department. These configuration
settings may include access point settings for data
connections and other settings used by different
applications in your device.
To connect to a server and receive configuration settings
for your device, select
To allow or deny receiving of configuration settings from a
Options >
service provider, select

Server profile settings

Contact your service provider for the correct settings.
Server name—Enter a name for the configuration server.
Server ID—Enter the unique ID to identify the
or Incomplete) and configuration server.
Server password—Enter a password to identify your device
to the server.
Connect. > Dev. mgr.. You may
Start configuration.
Enable config. or Disable config..