Call Duration; Packet Data; Monitor All Communication Events - Nokia N91 User Manual

To clear all recent call lists, select Options
calls in the recent calls main view. To clear one of the call
registers, open the register you want to erase, and select
Options > Clear list. To clear an individual event, open a
register, scroll to the event, and press

Call duration

To monitor the approximate duration of your incoming and
outgoing calls, press , and select Log
To set the display of the call duration while a call is active,
select My Own > Log > Options > Settings
duration. Select Yes or No.
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
features, rounding off for billing, and so forth.
To clear call duration timers, select Options
timers. For this you need the lock code, see 'Security',
'Device and SIM', p. 106.

Packet data

To check the amount of data sent and received during
packet data connections, press , and select
Packet data. For example, you may be charged for your
packet data connections by the amount of data sent and
received.

Monitor all communication events

> Clear recent
Icons in Log:
Incoming
Outgoing
.
Missed communication events
To monitor all voice and video calls, text messages, or data
connections registered by the device, press
Own > Log, and press the scroll key to the right to open
> Call duration.
the general log. For each communication event, you can
see the sender or recipient name, phone number, name of
> Show call
the service provider, or access point. You can filter the
general log to view just one type of event and create new
contact cards based on the log information.
Tip! If you want to see the duration of a voice call on
the main display during an active call, select
Settings > Show call duration
> Clear
Tip! To view a list of sent messages, press
select Messaging
Subevents, such as a text message sent in more than one
part and packet data connections, are logged as one
communication event. Connections to your mailbox,
multimedia messaging centre, or Web pages are shown as
Log >
packet data connections.
To filter the log, select
, select My
Options >
> Yes.
, and
> Sent.
Options > Filter and a filter.
76