Synchronise Data; Device Manager - Nokia N72 User Manual

Port (shown only if
Contact your service provider or system administrator
for the correct values.
User name—Your user ID for the synchronisation
server. Contact your service provider or system
administrator for your correct ID.
Password—Write your password. Contact your service
provider or system administrator for the correct value.
Allow sync requests—Select
the server to start a synchronisation.
Accept all sync
device to ask you before a synchronisation initialised
by the server is started.
Network authentic.
to Web)—Select
password. Press
password fields.
Press to select Contacts, Calendar, or Notes.
•
Select Yes
database.
•
In Remote
remote calendar, address book, or notes database
on the server.
•
Select Synchronisation
synchronisation),
3
Select Back to save the settings and return to the main
view.
80
Data bearer is set to Web)—
Yes if you want to allow
reqs.—Select No if you want your
(shown only if Data bearer
Yes to enter a network user name and
to view the user name and
if you want to synchronise the selected
database, enter a correct path to the
type: Normal
To server only, or To phone
Copyright © 2006 Nokia. All rights reserved.

Synchronise data

In the Sync
synchronisation profiles and the kind of data to be
synchronised.
1 Select a synchronisation profile and
Synchronise. The status of the synchronisation is
shown at the bottom of the screen.
To cancel synchronisation before it finishes,
select Cancel.
2
You are notified when the synchronisation is complete.
After synchronisation is complete, select
View log
is set status
calendar or contact entries, or notes have been added,
updated, deleted, or discarded (not synchronised) in
your device or on the server.

Device manager

Press , and select
receive server profiles and different configuration settings
(two-way
from your network operator, service provider, or company
only.
information management department. These configuration
settings may include access point settings for data
main view, you can see the different
to open a log file showing the synchronisation
(Complete or Incomplete) and how many
Connect. > Dev.
Options >
Options >
mgr.. You may