Nokia N91 User Manual page 111

• Access point for the Web application to view WML or
XHTML pages
• Internet access point (IAP) to send and receive e-mail
Check the type of access point you need with your service
provider for the service you wish to access. For availability
and subscription to packet data connection services,
contact your network operator or service provider.
Packet data connections in GSM and UMTS
networks
When you use your device in a GSM networkGSM and
UMTS networks, multiple data connections can be active
at the same time and access points can share a data
connection. In the UMTS network, data connections
remain active during voice calls. To check the active data
connections, see 'Connection manager', p. 94.
The following indicators may be displayed below the signal
indicator, depending on which network you use:
GSM network, packet data is available in the network.
GSM network, packet data connection is active, data is
being transferred.
GSM network, multiple packet data connections are
active.
GSM network, packet data connection is on hold. (This
can happen during a voice call, for example.)
UMTS network, packet data is available in the network.
UMTS network, packet data connection is active, data
is being transferred.
UMTS network, multiple packet data connections are
active.
UMTS network, packet data connection is on hold.
Access points
Some or all access points may be preset for your device by
your service provider or network operator, and you may
not be able to change, create, edit, or remove them.
indicates a protected access point. You may also receive
access point settings in a text message from a service
provider. See 'Data and settings', p. 56.
Tip! See also 'Receive MMS and e-mail settings', p.
54, 'E-mail', p. 62, and 'Access point for Services', p. 84.
indicates a packet data access point, and
wireless LAN access point.
To create a new access point, press , and select
Settings > Connection > Access points
New access point.
Follow the instructions given to you by your service
provider.
Connection name—Give a descriptive name for the
connection.
a
Tools
> Options >
103