Manual Synchronization
The admin redundancy synchronize command performs manual CPM synchronizations. The
boot-env parameter synchronizes the BOF, image, and configuration files in redundant systems.
The config parameter synchronizes only the configuration files in redundant systems.
Forcing a Switchover
The force-switchover now command forces an immediate switchover to the standby CPM card.
If the active and standby are not synchronized for some reason, users can manually synchronize
the standby CPM by rebooting the standby by issuing the admin reboot standby command on the
active or the standby CPM.
Page 262
7450 ESS OS Basic System Configuration Guide