Earphone Connection; Dimmer Control; Resetting The Unit - Jensen JCR-315 User Manual

Digital am/fm dual alarm clock radio with wood cabinet

Hide thumbs

Table Of Contents

Table of Contents

Connect the plug of the stereo earphone (not included) into the EARPHONE JACK (#19).

When using earphone, the speaker will be automatically disconnected. Adjust the VOLUME

CONTROL (#5) to the desired volume level

CAUTION

• Avoid excessive volume levels for long period of time when using the earphone.

Prolonged use at high levels may impair your hearing.

Press and hold the SLEEP/SNOOZE/DIMMER BUTTON (#13), Hi, Low or Off will show on

the LCD DISPLAY (#8). Tap the SLEEP/SNOOZE/DIMMER BUTTON (#13) repeatedly to

select the brightness.

return to the previous screen.

CONNECTING A USB CORD (NOT INCLUDED) FOR CHARGING YOUR CELL PHONE

(DC 5V

1000MA)

1. Plug the standard end of the USB cable (not included) into the USB CHARGING PORT

(#17) located on the back of the JCR-315. Plug the other end of the cable into the device

you wish to charge.

2. Observe the battery charge indicator on your device to make sure the charging process

starts normally.

3. Unplug the cable when your device is fully charged.

WARNING!

The USB CHARGING PORT (#17) located on the back of the JCR-315 is designed for a

smart phone or portable device battery charging only and does not support data transfer

or connection to a computer.

Don't connect the USB CHARGING PORT (#17) of the JCR-315 to other USB charger. It

may damage both units and void the warranty.

In case of malfunction due to electrostatic discharge, reset the unit by disconnecting the DC

plug of the AC Adapter from its rear DC IN JACK (#20). Remove the backup batteries. Wait at

least for 3 minutes before reconnecting the DC plug to the DC IN JACK (#20) and replace the

backup batteries.