Key Lock; Changing The Values; Optional Features; Cabin Light/Dimmer - Sawo STN-30-1/2 Manual

Key lock

Changing the values

Pressing the up or down button in the settings menu will in- or
decrease the currently displayed value. A value cannot be in- or
decreased above or below its maximum or minimum value, if it is tried
low tone buzzer alarms the user.
The up and down buttons are repetitive. Holding the up or down button
will cause the value to in- or decrease with an increased rate.
If no keys are pressed within 5 seconds, changes in the values are
confirmed.
In the "On" mode, if no keys are pressed for 10 seconds, the display
will automatically display the set temperature.

optional features

(Optional features are not available in every model)

Cabin light/Dimmer

If the dimmer is not present and the cabin light button is pressed, it will
switch the cabin light On/Off. When cabin light is ON red LED-indicator
next to Cabin light button in the panel is lit.
If dimmer feature is available press "cabin light" button to turn cabin
lights on and off. Light intensity value will be shown in the display
and by pressing "up" or "down" arrows cabin light can be brighten or
dimmed respectively.
If cabin lights are already turned on long press "cabin light" button to
activate dimmer in order to change light intensity.
If no buttons are pressed within 5 seconds the last cabin light intensity
value will be saved.

fan

Fan can be operated in "On" and "Standby" modes. Long press (more
than 3 seconds) "Fan/Scent" button in order to switch fan on/off.
Lock and unlock the key pad by pressing the up and down buttons
at the same time for more than 5 seconds. A high beep will
confirm the activation and the deactivation.
Only On/Off, Standby and Cabin light buttons are usable when the
key pad is locked. If other buttons are pressed, "----" is shown in
the display.
The key lock function is set automatically if it was left active
during the previous operation.
7
ENGLISH