Figure 2-20.Connecting The Cables - ADC WFX-3900-16 L11 User Manual

Chapter 2: Installation December 22, 2005
Connecting the Cables
Feed the power and Ethernet cables through the access hole in the tile and the mounting plate (WFX-3900), then
connect the cables to the unit. See also "Wiring Considerations" on page 2-14.
Figure 2-20. Connecting the Cables
When the cables are connected, turn on the power switch—before attaching the unit to the mounting plate (next
step). Verify that the Ethernet link LED lights and the LED boot sequence begins. The radio LEDs on the front of the
unit will illuminate in rotation, indicating that the Array software is loading and the unit is functioning correctly.
2-18 AIWS-UM-4003-01