ADC WFX-3900-16 L11 User Manual page 121

December 22, 2005
dhcp-server
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
AIWS-UM-4003-01
Configures the local DHCP server settings—available from the Config-> dhcp-server
command mode.
dhcp {on | off | {start-ip-range <sipr> | end-ip-range <eipr> |
default-lease <defl> | max-lease <maxl>}@}
on Enable the DHCP server
off Disable the DHCP server
start-ip-range Starting IP address for the lease pool
end-ip-range Ending IP address for the lease pool
default-lease Default lease period (in minutes), if one is not requested
max-lease Maximum lease period allowed
show Display the current DHCP server settings
Default lease time: 300
Maximum lease time: 300
None.
To set the IP address range for the local DHCP server and enable the server, type:
ADC_WLAN_Array(config)# dhcp-server
ADC_WLAN_Array(config-dhcp-server)# start-ip-range 192.168.1.100
end-ip-range 192.168.1.200
ADC_WLAN_Array(config-dhcp-server)# show
DHCP Server Settings Summary
----------------------------
State
Address range start 192.168.1.100
Address range end
Default lease time
Maximum lease time
None.
disabled
192.168.1.200
300
300
Chapter 5: Command-Line Interface
5-9