ADC WFX-3900-16 L11 User Manual page 138

Chapter 5: Command-Line Interface
save
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
security
Description
Syntax
Parameters
Syntax
5-26
Permanently saves the current configuration so that changes will be available at the next
system boot.
save
None.
None.
None.
To permanently save the current configuration, type:
ADC_WLAN_Array(config)# save
None.
Set wireless and other security parameters for the Array. Available via the config-security
command mode.
There are two options available from the Security command mode:
• wep: Set WEP encryption parameters
• wpa: Set WPA encryption parameters
wep { on | off | default_key <keyid> | key {<keynum> size [not_set
| <wepsz> { ascii | hex | enc } <keystr> ] } }
on Enable WEP encryption
off Disable WEP encryption
key Set static WEP key number 1-4
size Key size (40 or 128 bits, default = 128)
ascii ASCII characters
hex Hex digits
enc Encrypted form
default_key Default key ID 1-4
wpa { on | off | rekey { never | <ti> } | { no ] tkip [ on | off
} | [ no ] aes [ on | off ] | [ no ] eap [ on | off ] | [ no ] psk
[ on | off ] | passphrase { not_set | <pstr> | enc <epstr> }}
December 22, 2005
AIWS-UM-4003-01