ADC WFX-3900-16 L11 User Manual page 133

December 22, 2005
iap global_bg_settings
Description
Syntax
AIWS-UM-4003-01
Makes global configuration changes to all 802.11bg Integrated Access Point (IAP) radio
interfaces—available via the Config-> Interface command mode.
This command allows configuration changes to all 802.11bg IAP interfaces. Other global
settings can be made for specific groups of IAPs by using one of the below parameters in
the Interface IAP command mode:
• iap number: Configuration for a specific IAP. The prompt will change to: IAP number
(config-iap-a12)#
• global_bg_settings: Common configuration for all 802.11b/g IAPs. The prompt will
change to: (config-iap-global-bg)#
• global_settings: Common configuration for all IAPs. The prompt will change to:
(config-iap-global)#
IAPGlobalBG {all_down | all_up | slot_time {short_slot | long_slot} | [no] dot11g_protect
[on | off] | [no] dot11g_only [on | off] | cellsize {small | medium | large} | rx-threshold
<thresrx> | tx-power <powertx> | preamble {short_preamble | long_preamble} |
auto_channel | rts-threshold <rtst> | frag-threshold <fragt> | rates {defaults |
optimize_range | optimize_throughput | {
[<br6> [<br7> [<br8> [<br9> [<br10> [<br11> [<br12>]]]]]]]]]]]} | supported { [<sr1> [<sr2>
[<sr3> [<sr4> [<sr5> [<sr6> [<sr7> [<sr8> [<sr9> [<sr10> [<sr11> [<sr12>]]]]]]]]]]]]}}}}
Chapter 5: Command-Line Interface
basic { <br1> [<br2> [<br3> [<br4> [<br5>
5-21