ADC WFX-3900-16 L11 User Manual page 120

Chapter 5: Command-Line Interface
copy
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
date-time
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
5-8
Creates a copy of the specified file on the Flash file system.
copy <sourcefile> <destinationfile>
sourcefile The existing source file name
destinationfile The new destination file name
None.
None.
To create a backup of the current system image file, type:
ADC_WLAN_Array(config)# copy
"dir"
"erase"
Set the date/time for the Array—available from the config command mode, using the
format hh:mm mm/dd/yyyy.
date-time <date/time>
dst_adjust Adjust daylight savings
no Disable daylight savings
ntp Configure the NTP server
set Set the date and time for the Array
timezone Configure the time zone
None.
You access the date-time command mode from the config mode.
To disable daylight savings, type:
(config-date-time)# no dst
None.
December 22, 2005
WFX-39-1.1.0 WFX-39-1.1.BAK
AIWS-UM-4003-01