ADC WFX-3900-16 L11 User Manual page 119

December 22, 2005
console
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
contact-info
Description
Syntax
Parameters
Defaults
Usage Guidelines
Example
See Also
AIWS-UM-4003-01
Configures the Console Interface (serial port)—available from the config-interface
command mode.
console { {baud <brate> | bytesize <bsz> | stopbits <sbit> |
parity {none | odd | even} | timeout <idleto>}@}
timeout Console inactivity timeout in seconds
baud Async port baud rate 2400 - 115,200 bps
bytesize Async port word size 7 or 8 bits
stopbits Async port number of stop bits 0, 1, or 2
parity Async port number of parity bits
none No parity
odd Odd parity
even Even parity
115,200, 8bit, No Parity, 1 Stop bit, No Flow Control.
None.
To set the baud rate of the console serial port to 9600 baud:
config-interface console
(config-console)# baud 9600
None.
Sets the contact information for this Array—available from the config command mode.
contact-info {name [<conname>] | email [<emailcontact>] | phone
[<contele>]}@
contact-info Contact information for assistance on this Array
name Contact name (must be within quotes)
email Contact email address (must be within quotes)
phone Contact telephone number (must be within quotes)
None.
None.
To add new contact information (name and telephone number):
config-contact-info
(config-contact-info)# name Bill phone 8181239876
None.
Chapter 5: Command-Line Interface
5-7