Brake Adjustment Tandem Abs - Atlas Copco XRHS 506 Instruction Manual

Instruction Manual
5.5.5

Brake adjustment tandem ABS

Adjusting the linkage
The parking brake is adjusted by using the turnbuckle (3.2). Adjust till there is almost no play in
•
the linkage is (max. 3mm is allowed). Take care that at both thread ends at least two complete
turns of the thread (l) are visible in the inner part of the turnbuckle.
• Apply the parking brake lever several times by hand with a force of 200 to 300 N and put it
back into the -not engaged- tooth "1" position. Adjust the turnbuckle (3.2) as described above.
Testing the parking brake
• For testing the parking brake, apply the parking brake lever. The nominal brake power must be
reached between the 6
2954 2510 03
(3.3) (4.2)
Tighten all lock nuts (3.3) (Torque: 40 Nm).
th th
and 12 tooth of the toothed segment ("C").
"6"
"1"
"C"
(4)
(3.2)
(4.1)
(42±2) (3.3) (3.3)
"12"
"C"
(3)
(l)
(3.3)
85