Topping Up/Replacing Coolant - Atlas Copco XRHS 506 Instruction Manual

Instruction Manual
4.11

Topping up/replacing coolant

Verify if the engine cooling system is in a good condition (no leaks, clean,...).
•
• Check the condition of the coolant.
If the condition of the coolant is outside the limits, the complete coolant should be replaced (see
•
section 4.11.3 Replacing the coolant).
Always top-up with PARCOOL EG Concentrate / PARCOOL EG.
•
• Topping up the coolant with water only, changes the concentration of additives and is therefore
not allowed.
2954 2510 03 69