Using Text Messaging - Polycom SOUNDPOINT IP 450 User Manual

User Guide for the SoundPoint IP 450 Desktop Phone

Using Text Messaging

4 - 2
The following figure shows an incoming call from Adam Kirk on the same
line.
To answer an incoming call when configured for multiple call appearances:
Do one of the following:
>>
— Press or the Hold soft key to place the original call on hold.
— Press to access the new call.
Answer the incoming call.
This original call is placed on hold and the incoming call becomes the
active call.
Your phone can display two call appearances at one time. If more than two
calls are taking place on the same line, a counter displays on the display. Use
the down arrow to access additional calls, or "appearances".
To place an additional call on the same line, place the active call on hold, and
then press the New Call soft key.
You can send and receive text messages using your phone. Text messaging is
supported in real-time. Your phone indicates text messages by a flashing
Message Waiting Indicator LED on the front of the phone and, optionally, a
visual notification on the screen.