Note
You can also dial using the SIP URL or IP address. To obtain the IP address of your
phone, press the Menu key, and then select Status > Platform > Phone. The IP
address is listed together with other phone information. The maximum URL or IP
address length is 32 characters. For example, 10.3.0.42, sip:jane@polycom.com .
Press the URL soft key and enter the URL or IP address. Use * for "." and # for "@".
Then press the Send soft key to complete the call.
Your phone may not support SIP URL or IP address dialing. Contact your system
administrator.
To place a call using Hands-Free Speakerphone mode:
Note
If "Handsfree mode disabled" appears on the screen after you press the
speakerphone key
your phone.
Do one of the following:
>>
— With the handset on-hook, press
NewCall soft key to obtain a dial tone.
Dial the number using the dial pad.
— With the handset on-hook, dial the number using the dial pad.
Press
To place a call using the headset:
Do one of the following:
>>
— With the optional headset connected, press
NewCall soft key to obtain dial tone.
Press
Dial the desired number using the dial pad.
— With the optional headset connected, dial the desired number using
the dial pad.
Press
To permanently enable your headset, refer to
Note
on page 2-6.
,
your system administrator has disabled the speakerphone on
,
, or the Dial soft key.
.
.
Using the Basic Features of Your Phone
,
, or the
Enabling the Headset Memory Mode
or the
3 - 3