Polycom SOUNDPOINT IP 450 User Manual page 57

2. If multiple lines are configured on your phone, select the line to forward
from the list using the arrow keys.
3. Scroll to select the forwarding type you want to change, and then press
the Select soft key. The options are:
— Always—To forward all incoming calls
— No Answer—To forward unanswered incoming calls
— Busy—To forward calls that arrive when you are already in a call
4. Depending on your selection:
If you selected Always, enter a number to forward all future incoming
a
calls to.
If you selected No Answer, enter a number to forward all unanswered
b
incoming calls to and how many rings to wait before forwarding (one
ring is approximately six seconds). A value of 2 is recommended.
If you selected Busy, enter a number to forward all future incoming
c
calls to when you are already in another call.
You can also enter the SIP URL or IP address. For more information on using a SIP
Note
URL or IP address, refer to
5. Select the Enable soft key to confirm call forwarding.
Using the Basic Features of Your Phone
Placing Calls on page 3-2
3 - 17