Yard Layout Examples - Husqvarna AUTOMOWER 440 Operator's Manual

3.23 Yard layout examples

The robotic mower's behaviour is controlled to a certain extent by what settings are made. Adapting the robotic
lawnmower's settings according to the shape of the lawn makes it easier for the robotic lawnmower to frequently
reach all parts and therefore achieve a perfect mowing result.
Different layouts require different settings. The following pages outline a number of layout examples with installation
proposals and settings.
The recommended timer settings in the following examples are applicable to Automower 420 unless otherwise stated.
There is more installation help on www.husqvarna.com. Select country, then enter the supportpages for more
information and videos.
Note: The default settings for the robotic lawnmower have been chosen to work in as many different gardens as
possible. The settings only need to be adjusted when special installation conditions exist.
3.23.1 Open and level area
Area 150 m
Timer
08:00 am - 12:00 pm
Monday, Wednesday, Friday
Lawn coverage Factory setting
Find charging sta-
Factory setting
tion
Remarks The timer should be used to prevent
the grass looking trampled since the
area is significantly less than the
maximum capacity of the robotic
lawnmower.
As the area is open and uncomplica-
ted there is no need for a guide wire
in this installation.
3.23.2 A number of islands and a 35% slope
Area 500 m
Timer
08:00 am - 04:00 pm
Monday, Tuesday, Thursday, Friday,
Saturday
Lawn coverage Factory setting
Find charging sta-
Factory setting
tion
Remarks Place the charging station in the low-
er part of the working area. Lay the
guide wire at an angle over the steep
slope. Make sure guide wire is laid
according to recommendations in
Laying and connecting the guide wire
on page 20
40 - Installation
2
/ 1615 sq ft.
2
/ 5382 sq ft.
270˚
90˚
447 - 001 -