Security - Husqvarna AUTOMOWER 440 Operator's Manual

3.13.5 Edit day
First select the day to edit from the Overview screen
using the left/right arrow keys followed by OK.
2 time intervals per day can be entered. To enter an
Period 1 , first make sure that the check box
interval for
Period 1 is checked. To check/uncheck select
next to
the check box and press OK. Enter the time using the
numeric keypad.
Period 2 is entered the same way as Period 1 . Two
intervals can be useful for enabling the lawn for other
activities during certain hours, for example by entering
Period 1 : 00:00 am - 03:00 pm and Period 2 : 09:00 pm -
00:00 am. The mower will then be parked in the
charging station between 03:00 pm and 09:00 pm.
To disable mowing a whole day, uncheck both periods.
3.13.6 Copy
Use this function to copy the current day settings to
other days.
Copy by using arrow keys and press OK. Then use
Mark
the up and down arrow keys to move the cursor
between days. The times will be copied to the days that
are marked with OK.
3.13.7 Reset
This function resets the timer to the factory setting,
where the robotic lawnmower is allowed to operate 24
hours a day every day.
Reset timer
3.13.7.1 Current day
This resets the day that is selected in the tab system.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day.
3.13.7.2 All week
This resets all days in the week.
The factory setting is that the robotic lawnmower is
allowed to operate 24 hours a day every day.
26 - Installation
Current day
All week

3.14 Security

Through this selection, settings relating to security and
the connection between the robotic lawnmower and the
charging station can be made.
SECURITY
Security level
Advanced
3.14.1 Security level
There are 3 security levels to choose from.
Security level
Low and Medium security prohibits access to the robotic
lawnmower if the PIN code is unknown.
also includes a warning that beeps if the correct PIN
code is not entered after a designated time period.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
Function Low
Time lock
PIN request
Alarm
3.14.1.1 Time lock
This function means that the robotic lawnmower cannot
be started after 30 days without first entering the correct
PIN code. When the 30 days has passed the robotic
lawnmower will continue to mow as normal, but the
Enter PIN code message appears when the hatch is
opened. Enter your code again and press OK.
3.14.1.2 PIN request
This function means that the robotic lawnmower
requests a PIN code when the main switch is set to
and each time the hatch is opened. The correct PIN
code must be entered to use the robotic lawnmower.
If the wrong PIN code is entered 5 times in succession
the robotic lawnmower is blocked for a time. The
blockage time is extended for every new incorrect
attempt.
3.14.1.3 Alarm
This function means that an alarm sounds if the PIN
code is not entered within 10 seconds after the STOP
button has been pressed or the robotic lawnmower has
been lifted up for any reason. A ticking noise indicates
Low
Medium
High
High security
Medium High
X X
X
447 - 001 -
X
X
X
1