Menu Structure - Husqvarna AUTOMOWER 440 Operator's Manual

• The arrow keys are used to navigate in the menu but
also to make selections in certain setting options.
• The MENU button is used to go to the main menu.
• The PARK button is used to send the robotic
lawnmower to the charging station.
• The number keys are used to enter settings, for
example PIN code, time or exit direction.
3.11.3 Display
When the STOP button has been pressed and the hatch
is opened, the display is showing the following
information:
• Operating information, e.g.
TIMER . If the stop button is pressed when the
robotic lawnmower is running, what it did just before
MOWING or SEARCHING is
it was stopped e.g.
displayed. The text READY is displayed if the robotic
lawnmower is not in any specific operating mode,
e.g. if the main switch has just been turned on.
• Date and clock show the current time:
3.11.4 Symbols shown on the display
The black clock symbol (A) indicates when the mower is
not allowed to mow due to a timer setting. If the mower
is not allowed to mow due to Weather timer, symbol (B)
is shown. If the operation mode
chosen, symbol (C) is shown.
The battery status shows the remaining battery charge.
If the robotic lawnmower is loading, a flash is also
shown over the battery symbol (D). If the robotic
lawnmower is placed in the charging station without
charging, (E) is shown.
The ECO symbol (F) is displayed if the robotic
ECO mode .
lawnmower is set in
A
D
3.11.5 Submenus
There are a number of submenus under each option.
You can access all the functions to set the robotic
lawnmower settings via the submenus.
22 - Installation
MOWING, PARKED or
Override timer is
B C
E F
Certain submenus contain options that are ticked off to
the left. This means that these options are selected.
Check or uncheck the box by pressing OK.

3.12 Menu structure

The main menu offers 8 options:
Timer
•
• Cutting height
Security
•
Messages
•
Weather timer
•
Installation
•
Settings
•
Accessories
•
3.12.1 Main menu
Timer
The timer function is an ideal tool to
control which periods the robotic
lawnmower should not mow, for example
when the children are playing in the
garden. See
Cutting height
The cutting height can be varied from MIN
(2 cm) to MAX (6 cm). During the first
week after a new installation, the cutting
height must be set to MAX to avoid
damaging the loop wire. After this, the
cutting height can be lowered one step
every week until the desired cutting height
has been reached. See
height on page 46 .
Security
In this menu, settings relating to security
and the connection between the robotic
lawnmower and the charging station can
be made. There are 3 security levels to
choose from:
Security on page 26 .
Timer on page 23
Adjust cutting
Low , Medium , High . See
447 - 001 -