Alarm Management
⑤ Click "Apply" to save the settings.
⑥ Click "Processing Mode" to go to the alarm handling configuration interface of object
detection.
Object Detection Alarm Handling Configuration:
① Click Start Settings Alarm Intelligence Alarm Object Detection to go to the
following interface.
② Enable or disable "Snap", "Alarm-out", "Preset", "Buzzer", "Pop-up Video" and "E-mail".
The alarm handling setting of object detection alarm is similar to that of the sensor alarm (see
9.1 Sensor Alarm for details).
③ Click "Apply" to save the settings. You can click "Article Protect Config" to go to the
object detection configuration interface.
64
DVR User Manual