Table of Contents
Advertisement
Playback & Backup
Click on the playback window to show the tool bar as shown in area ③; right click on the
window to show the menu list. The tool bar and menu list are introduced in the table below.
Button
--
Enable Audio
Snap
Zoom In
Add Tag
Switch Camera
Close Camera
Introduction of area ④:
Click
to set the date; click
record from the time you set. You can check the record type as required for record playback;
first you should click
camera, then check the record type (
based record;
playback window to add camera for playback (the record time scale will show the record data
of the checked record type only after the above operations).
Introduction of the record time scale (area ⑤):
A tool bar will appear after moving the mouse to the record time scale. Click
zoom the timeline; click
slide the scroll wheel of the mouse on the time scale to show the hidden time on the top or
bottom of the timeline. You can also click
timeline or click
the bottom of the time scale to show the hidden playback cameras.
The record time scale shows different record types with different colors. The green block
stands for manual record, red block stands for sensor based record, yellow block stands for
motion based record, blue block stands for schedule record and cyan block stands for
intelligence record. Click the record block to set the time and then the playback camera will
play the record from the time you set.
Drag the color block on the time scale to select the backup area and then right click the area or
Menu List
Move tool. Click it to move the tool bar anywhere.
Click it to enable audio. You can listen to the camera audio by
enabling audio.
Click it to snap.
Click it to go to the zoom in interface. The zoom in interface is
similar to that of the camera window in the live preview interface.
Click
record. When the record is paused in forward playing mode, you
can click
view the next frame.
Click it to add tag. You can play back the record by searching the
added tag. Click it and then input the tag name in the popup
window. Click "Add" to add tag.
Click it to switch the playback camera. Click it and then check the
camera in the popup window. Click "OK" to change the camera.
Click it to close the playback camera.
to set the time and then the playback camera will play the
on the tool bar at the bottom of the interface to clear all the playback
: schedule record;
to recover the timeline to 24 hours' ratio. Drag the timeline or
to show the hidden time on the bottom of the timeline. Drag the slider at
Meaning
to pause the record playing; click
to view the previous frame and click
: manual record;
: intelligence record) and finally click
to show the hidden time on the top of the
54
DVR User Manual
to play the
: sensor based record;
to
: motion
in the
/
to
Advertisement
Table of Contents
