Philips HD5730 User Manual page 21

11 Press the OK button.
Hot water comes out of the spout and flows into the bowl below.
,
The message 'FLUSHING...' is shown on the display.
The message 'FLUSHING - Push OK when ready' appears on the
,
display.
When the water tank is empty, the message 'FLUSHING DONE'
,
appears on the display.
The descaling program is now finished and the appliance is ready to brew
coffee again.
Note: If the descaling program is interrupted before completion, the appliance
continues to display the message 'PLEASE DESCALE!' and you have to start the
program from the beginning again.
setting coffee temperature
1 Press the MENU button.
The button lights up.
,
 Press the ^ button until the message 'SET TEMPERATURE?' appears
on the display.
 Press the OK button.
 Press the ^ or % button until the desired coffee temperature is
displayed (low, medium or high).
5 Press the OK button to confirm the temperature selected.
The appliance automatically exits the MENU mode.
,
setting auto-on time
This function allows you to set a time at which the appliance automatically
switches on.
1 Make sure the clock on the appliance is set as described (see section
'Setting current time' in this chapter).
 Press the MENU button.
The button lights up.
,
 Press the ^ button until the message 'SET AUTO-ON?' appears on
the display.
 Press the OK button.
The message 'AUTO-ON: Disabled' appears on the display.
,
5 Press the ^ or % or button to set the hour of the auto-on time.
6 Press the OK button to confirm the hour set.
7 Press the ^ or % button to set the minutes of the auto-on time.
8 Press the OK button to confirm the minutes set.
The appliance automatically exits the MENU mode.
,
Note: When you switch off the appliance while an auto-on time is set, the >
symbol appears next to the time on the unlit display. The clock and the symbol
disappear after 5 minutes.
EnglisH
1