Philips HD5730 User Manual page 29

Message Meaning
NO MILK JUG! The milk jug is not inserted.
Problem
The display does not
work.
The text on the
display is in the
wrong language.
The coffee is not
hot enough.
The coffee is not
creamy enough.
The coffee flows out
of the spout too
slowly.
The coffee flows
out of the spout too
quickly.
The coffee only
comes out of one of
the two spout holes.
troubleshooting
If you are unable to solve the problem with the information below, contact
the Consumer Care Centre in your country (see chapter 'Guarantee and
service').
Possible cause
You have not removed the
sticker from the display.
You have set the wrong
language.
The cups have not been
preheated.
The coffee temperature is
set too low in the menu.
The coffee is ground too
coarsely.
You have used a wrong type
of coffee.
The coffee is ground too
finely.
The coffee is ground too
coarsely.
One of the spout holes is
blocked.
What to do
Place the milk jug in the appliance.
Solution
Remove the sticker from the display.
If you set the wrong language during the initial
installation procedure, you first have to complete
the installation procedure before the language
can be changed. Consult the Quick Start Guide
guide or the user manual on how to complete
the installation procedure. The installation is
complete when the appliance switches off
automatically. To select another language: (1) Press
the on/off button to switch on the appliance. (2)
Press the MENU button. (3) Press the % button
twice. (4) Press the OK button. (4) Select the
preferred language with the % and ^ buttons.
(5) Press the OK button.
To preheat the cups, rinse them with hot water
or leave them on the cup warmer tray on top of
the switched-on appliance for at least 20 minutes.
Increase the coffee temperature in the menu
(see chapter 'Setting menu parameters).
Turn the grinding adjustment knob one setting
anticlockwise.
Use a type of coffee suitable for espresso coffee
makers.
Turn the grinding adjustment knob one setting
clockwise.
Turn the grinding adjustment knob one setting
anticlockwise.
Use a needle to scrape dried coffee residues out
of the blocked spout hole.
EnglisH
9