Technical Data; Noise Emission Specifications; Vibration Specifications; Scope Of Supply - Mafell Z5Ec Original Operating Instructions

2.3 Technical data

Cutting depth
Roller diameter
Saw band width
Saw band length
Saw band gauge max.
Band pivoting
Idling speed
Cutting speed when idle
Hose connector diameter
Weight without mains cable
Universal motor with radio and television
interference
Input power continuous operation
Current at nominal load

2.4 Noise emission specifications

Noise emission values determined according to EN 60745-1:
Idling
The noise measurements were conducted using the band saw blades included in the delivery specification.
The values stated do not take into consideration any possible series variances and are not suitable for
determining the rating levels, as these fluctuate in dependence on the time in service, the respective type of
machining and the environmental influences. The noise rating level can therefore only be determined on an
individual basis at the machine user's position.

2.5 Vibration specifications

The typical hand-arm vibration is less than 2.5 m/s

2.6 Scope of supply

Portable band saw Z 5 Ec complete with:
1 saw band, coarse 8 mm (5/16 in.), serrated
1 saw band, coarse 6 mm (15/64 in.)
1 saw band, coarse 8 mm (5/16 in.)
1 handle cpl.
1 adapter
1 operating manual
1 folder "Safety Instructions"
Sound power level
99 dB (A)
.
2
-15-
305 mm (12 in.)
205 mm (8 1/16 in.)
6 - 8 mm (15/64 – 5/16 in.)
1752 mm (69 in.)
0.65 mm (1/32 in.)
30°
1550 - 650 rpm
16.6 – 6.9 m/s (54.4 – 22.6 ft/sec)
35 mm (1 3/8 in.)
13,6 kg (29.9 lbs)
230 V~, 50 Hz
2250 W
10 A
Workplace-related emission value
88 dB (A)