Table of Contents
Advertisement
IGNITION – ADJUSTMENTS
1. S
TARTING THE APPLIANCE
INITIAL IGNITION
Defuse any trapped air from the gas network, starting with each of the burners on
the cooktop. Once this is done, the gas oven can then be ignited. However, if the
safety device for the oven is activated (red indicator ON), press the reset button
above the red indicator to repeat the procedure.
The gas burners on our "Cornuchef" range appliances are fitted with safety thermocouples:
if a burner shuts off for any reason, the gas supply for that burner is automatically stopped.
1.1. Gas burners with electric ignition
All of our appliances are originally equipped with automatic gas burner
ignition.
To ignite a gas burner, press the control knob and turn it to the left to
the "high flame" position.
The burner is automatically ignited. Keep the knob pressed for 5 – 10
seconds (the safety thermocouple may take longer to react the first
time).
The sparking noise means that the ignition system is operating
normally.
· Low setting: this is achieved by rotating the knob fully to the left or to the bottom.
· Shutoff: bring the knob back to its vertical position by rotating it to the right.
1.2. Hotplate with electric ignition
Ignition identical to that for gas burners.
I
– A
GNITION
Gas hotplate
Installation Guide - "Cornuchef" Range
DJUSTMENTS
Starting the appliance
19
Advertisement
Table of Contents
