Table of Contents
Advertisement
Gas supply
3. G
AS SUPPLY
The gas installation must comply with the current regulations in the country
where the appliance will be installed.
Reminder of the main obligations with regard to gas installations:
The gas must be supplied via a rigid metallic pipe, terminated by an easily accessible
manual shutoff valve.
This valve must be positioned, taking into account that the gas inlet on the appliance is
situated:
· on the left of the cooker or the hob.
· at the level of the work area (on the bottom left) for hobs.
See the drawings on the specific presentation pages for each model for details about the
connections.
When your cooker or your hob is built-in between two kitchen units, the shut-off valve
must be accessible through an appropriate cut-out in the back of the kitchen unit.
It is forbidden to use flexible rubber hoses with a collar fastening to supply gas to gas
appliances.
When all of the work has been carried out on your gas supply network, perform a
functional test before connecting the appliance; this will ensure that no metallic burrs can
enter the appliance's gas supply pipe and thus obstruct the burners or the gas taps.
4. I
NSTALLATION
In order to ensure that the hob is perfectly horizontal, especially on old flooring, we advise
you to install your cooker on a wooden or cement base and your hob on a perfectly
horizontal kitchen unit, the height of which will allow you to bring the hob to a level in
accordance with its environment or your own requirements.
Each cooker is equipped with adjustable feet that allow you to compensate for differences
in the floor level.
REMINDER: Ceramic cardboard with a minimum thickness of 20mm. must be
installed under the hob to insulate the units placed underneath.
16
Installation Guide - "Cornuchef" Range
BEFORE DELIVERY
Advertisement
Table of Contents
