Table of Contents
Advertisement
Calibration Settings
This sub-menu lets you choose which type of
calibrations you like to perform before each
scanning.
•
Smart mode: When this mode is checked,
the ScanWizard LS (USB) will memorize
the calibration values generated by
different scanning settings. These
memorized settings can be used later
when a scan job with a same value of
scanning settings is performed again.
This mode eliminates calibration time and
therefore enhances the scanning speed
when you often scan materials sharing
same scanning settings.
•
Typical mode: If this option is selected,
the ScanWizard LS (USB) calibrates your
scanner before performing a scan job if
the scanning settings are changed. It is
the default setting of the system.
Image Settings
This sub-menu lets you choose the path for
the CMS Profile.
The default setting is ObjectScan1600.icm.
ObjectScan 1600 User's Manual
31
Advertisement
Table of Contents
