Using Scanwizard Ls (Usb) Software - Microtek ObjectScan 1600 User Manual

Using ScanWizard LS (USB) Software

ScanWizard LS (USB) is scanning software exclusively designed by Microtek for
scanning large-size materials. Its user-friendly interface enables the beginners
or the professionals to start the scanning process easily and quickly. Refer to
the section "Knowing about ScanWizard LS (USB) Further" in back for more
details.
1. Refer to the descriptions in "Positioning the Materials" to place the material
to be scanned on the scan bed.
2. Launch ScanWizard LS (USB) and the main control panel will appear on the
screen.
3. Click the Preview button in the control panel to perform a preliminary view
of the entire image. When done, a preview image appears in the preview
window.
Note: If you want to cancel the action of the Preview command, press the
Esc button on the keyboard.
4. If necessary, click the Scan Frame tool button to adjust the size of the scan
frame, enclosed within the red dotted lines. Drag on the edge or corner of
the scan frame to resize the scan frame.
5. Click the Window menu and then select the Tools option. The Tools window
will appear on the screen immediately. Specify your scanning requirements
in the Tools window.
Open the Tools
Window and
Advanced Tools
Window from the
Window menu
a) Select your desired image output
resolution in the Resolutions drop-down
menu.
b) Select your image output type in the
Color Modes drop-down menu.
6. If necessary, adjust image quality by using the
image correction tools. To activate the image
correction tools, click the Window menu
and then select the Advanced Tools option.
Specify your scanning requirements in the
Advanced Tools window.
ObjectScan 1600 User's Manual 17