Starting The Calibration Program - Miele WWH 860 Operating And Installation Instructions

Before using for the first time
5. Starting the calibration
program
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Normal program must
be run without laundry and without
detergent.
No other programs can be started until
calibration has been carried out.
The following message appears in the
display:
Open  and run "Normal" with "Hot Plus"
without laundry.
 Touch the  sensor button until the
OK sensor button lights up and
confirm this with OK.
 
Hot +
Max
 
 Turn on the water supply.
 Touch the Start/Stop sensor button.
The washing machine calibration
program has started. It will take
approximately 2 hours.
At the end of the program the following
message will appear in the display:

Set up complete
22
 Take hold of the door and pull it
Tip: Leave the door slightly open to
allow the drum to dry.
 Turn the program selector to the
1:40
OK
open.
 position.