Removing The Shipping Struts; Starting The Calibration Program - Miele WWF 060 Operating Instructions Manual

3. Removing the shipping
struts

Failure to remove the shipping
struts can result in damage to the
washing machine and to adjacent
cabinetry or appliances.
Remove the shipping struts as
described in "Installation and
connection".
The following message appears in the
display:

Remove shipping struts
 Confirm with the OK sensor button.
4. Starting the calibration
program
For optimum water and energy
consumption and excellent wash
results, it is important to calibrate the
washing machine.
To do this, the Normal program must
be run without laundry and without
detergent.
No other programs can be started until
calibration has been carried out.
The following message appears in the
display:
Open  and run "Normal", "Hot+" without
laundry.
 Touch the  sensor button until the
OK sensor button lights up and
confirm this with OK.
Initial commissioning
 
Hot+
Max
 
 Turn on the tap.
 Touch the Start/Stop sensor button.
The washing machine calibration
program has started. It will take
approximately 2 hours.
At the end of the program the following
message will appear in the display:

Set up complete
1:40
OK
19