Anti-Crease; Miele@Home - Miele WWH 860 Operating And Installation Instructions

Table of Contents

Advertisement

Anti-Crease

The Anti-crease function helps prevent
creasing after the end of the program.
At the end of the program, the drum
continues to turn for up to 30 minutes.
The washing machine door can be
unlocked and then opened at any time
by touching the Start/Stop sensor
button.
Anti-crease is switched on in the default
setting.

Miele@home

Control the networking of your
washing machine with your WiFi
network.
The following points may appear in the
submenu:
Set up
This message only appears if the
washing machine has not yet been
connected to a WiFi network.
Please refer to "Initial set-up" to set up
the connection.
Deactivate
(visible if Miele@home is
activated)
Miele@home remains set up, the WiFi
function is switched off.
Activate
(visible if Miele@home is
deactivated)
The WiFi function is reactivated.
Connection status
is activated)
The following values are displayed:
– The WiFi reception quality
– The network name
– The IP address
Set up again
(visible if set up)
Resets the WiFi login (network) to
immediately re-establish a new
connection.
Reset
(visible if set up)
– The WiFi is switched off.
– The WiFi connection will be reset to
the default setting.
Miele@home is no longer set up. A new
connection setup has to be carried out
in order to use the Miele@home setting
again.
Settings
(visible if Miele@home
91

Advertisement

Table of Contents
loading

Table of Contents